Tariffs API
Duty & tariff lookup
Chapter 72
| Code | Description | General Rate | Column 2 Rate | Special Rate | Units of Quantity |
|---|---|---|---|---|---|
| 7201 | Pig Iron And Spiegeleisen In Pigs, Blocks Or Other Primary Forms | — | — | — | — |
| 7201.10.00.00 | Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus | Free | $1.11/t | — | t |
| 7201.20.00.00 | Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus | Free | $1.11/t | — | t |
| 7201.50 | Alloy pig iron; spiegeleisen: | — | — | — | — |
| 7201.50.30.00 | Alloy pig iron | Free | $1.11/t | — | t |
| 7201.50.60.00 | Spiegeleisen | Free | 0.5% | — | t |
| 7202 | Ferroalloys: | — | — | — | — |
| 7202.11 | Containing by weight more than 2 percent of carbon: | — | — | — | — |
| 7202.11.10.00 | Containing by weight more than 2 percent but not more than 4 percent of carbon | 1.4% | 6.5% | — | kg |
| 7202.11.50.00 | Containing by weight more than 4 percent of carbon | 1.5% | 10.5% | — | kg |
| 7202.19 | Other: | — | — | — | — |
| 7202.19.10.00 | Containing by weight not more than 1 percent of carbon | 2.3% | 22% | — | kg |
| 7202.19.50.00 | Containing by weight more than 1 percent but not more than 2 percent of carbon | 1.4% | 6.5% | — | kg |
| 7202.21 | Containing by weight more than 55 percent of silicon: | — | — | — | — |
| 7202.21.10.00 | Containing by weight more than 3 percent of calcium | 1.1% | 11.5% | — | kg |
| 7202.21.50.00 | Other (7202.21.50.00) | 1.5% | 11.5% | — | kg |
| 7202.21.75.00 | Containing by weight more than 80 percent but not more than 90 percent of silicon | 1.9% | 9% | — | kg |
| 7202.21.90.00 | Containing by weight more than 90 percent of silicon | 5.8% | 40% | — | kg |
| 7202.29.00 | Other (7202.29.00) | Free | — | — | — |
| 7202.29.00.10 | Containing by weight over 2 percent of magnesium | — | — | — | kg |
| 7202.29.00.50 | Other (7202.29.00.50) | — | — | — | kg |
| 7202.30.00.00 | Ferrosilicon manganese | 3.9% | 23% | — | kg |
| 7202.41.00.00 | Containing by weight more than 4 percent of carbon | 1.9% | 7.5% | — | kg |
| 7202.49 | Other: | — | — | — | — |
| 7202.49.10.00 | Containing by weight more than 3 percent of carbon | 1.9% | 7.5% | — | kg |
| 7202.49.50 | Other (7202.49.50) | 3.1% | 30% | — | — |
| 7202.49.50.10 | Containing by weight more than 0.5 percent of carbon | — | — | — | kg |
| 7202.49.50.90 | Other (7202.49.50.90) | — | — | — | kg |
| 7202.50.00.00 | Ferrosilicon chromium | 10% | 25% | — | kg |
| 7202.60.00.00 | Ferronickel | Free | 6.6¢/kg | — | kg |
| 7202.70.00.00 | Ferromolybdenum | 4.5% | 31.5% | — | kg |
| 7202.80.00.00 | Ferrotungsten and ferrosilicon tungsten | 5.6% | 35% | — | kg |
| 7202.91.00.00 | Ferrotitanium and ferrosilicon titanium | 3.7% | 25% | — | kg |
| 7202.92.00.00 | Ferrovanadium | 4.2% | 25% | — | kg |
| 7202.93 | Ferroniobium: | — | — | — | — |
| 7202.93.40.00 | Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon | 5% | 25% | — | kg |
| 7202.93.80.00 | Other (7202.93.80.00) | 5% | 25% | — | kg |
| 7202.99 | Other: | — | — | — | — |
| 7202.99.10.00 | Ferrozirconium | 4.2% | 25% | — | kg |
| 7202.99.20.00 | Calcium silicon | 5% | 25% | — | kg |
| 7202.99.80 | Other (7202.99.80) | 5% | 25% | — | — |
| 7202.99.80.20 | Ferrophosphorus | — | — | — | kg |
| 7202.99.80.40 | Other (7202.99.80.40) | — | — | — | kg |
| 7203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms: | — | — | — | — |
| 7203.10.00.00 | Ferrous products obtained by direct reduction of iron ore | Free | $2.21/t | — | t |
| 7203.90.00.00 | Other (7203.90.00.00) | Free | — | — | t |
| 7204 | Ferrous waste and scrap; remelting scrap ingots of iron or steel: | — | — | — | — |
| 7204.10.00.00 | Waste and scrap of cast iron | Free | 74¢/t | — | t |
| 7204.21.00.00 | Of stainless steel | Free | 74¢/t | — | t |
| 7204.29.00.00 | Other (7204.29.00.00) | Free | — | — | t |
| 7204.30.00.00 | Waste and scrap of tinned iron or steel | Free | Free | — | t |
| 7204.41.00 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free | 74¢/t | — | — |
| 7204.41.00.20 | No. 1 bundles | — | — | — | t |
| 7204.41.00.40 | No. 2 bundles | — | — | — | t |
| 7204.41.00.60 | Borings, shovelings and turnings | — | — | — | t |
| 7204.41.00.80 | Other (7204.41.00.80) | — | — | — | t |
| 7204.49.00 | Other (7204.49.00) | Free | — | — | — |
| 7204.49.00.20 | No. 1 heavy melting | — | — | — | t |
| 7204.49.00.40 | No. 2 heavy melting | — | — | — | t |
| 7204.49.00.60 | Cut plate and structural | — | — | — | t |
| 7204.49.00.70 | Shredded | — | — | — | t |
| 7204.49.00.80 | Other (7204.49.00.80) | — | — | — | t |
| 7204.50.00.00 | Remelting scrap ingots | Free | 74¢/t | — | t |
| 7205 | Granules and powders, of pig iron, spiegeleisen, iron or steel: | — | — | — | — |
| 7205.10.00.00 | Granules | Free | 3% | — | kg |
| 7205.21.00.00 | Of alloy steel | Free | 45% | — | kg |
| 7205.29.00.00 | Other (7205.29.00.00) | Free | — | — | t |
| 7206 | Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203): | — | — | — | — |
| 7206.10.00.00 | Ingots | Free | 20% | — | kg |
| 7206.90.00.00 | Other (7206.90.00.00) | Free | 20% | — | kg |
| 7207 | Semifinished products of iron or nonalloy steel: | — | — | — | — |
| 7207.11.00.00 | Of rectangular (including square) cross section, the width measuring less than twice the thickness | Free | 20% | — | kg |
| 7207.12.00 | Other, of rectangular (other than square) cross section | Free | 20% | — | — |
| 7207.12.00.10 | Having a width measuring less than four times the thickness | — | — | — | kg |
| 7207.12.00.50 | Having a width measuring at least four times the thickness | — | — | — | kg |
| 7207.19.00 | Other (7207.19.00) | Free | 20% | — | — |
| 7207.19.00.30 | Of circular cross section | — | — | — | kg |
| 7207.19.00.90 | Other (7207.19.00.90) | — | — | — | kg |
| 7207.20.00 | Containing by weight 0.25 percent or more of carbon | Free | 20% | — | — |
| 7207.20.00.25 | Having a width measuring less than four times the thickness | — | — | — | kg |
| 7207.20.00.45 | Having a width measuring at least four times the thickness | — | — | — | kg |
| 7207.20.00.75 | Of circular cross section | — | — | — | kg |
| 7207.20.00.90 | Other (7207.20.00.90) | — | — | — | kg |
| 7208 | Flat-rolled products of iron or nonalloy steel, of a width of <il>600 mm</il> or more, hot-rolled, not clad, plated or coated: | — | — | — | — |
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief: | — | — | — | — |
| 7208.10.15.00 | Pickled | Free | 0.4¢/kg + 20% | — | kg |
| 7208.10.30.00 | Of a thickness of <il>4.75 mm</il> or more | Free | 20% | — | kg |
| 7208.10.60.00 | Of a thickness of less than <il>4.75 mm</il> | Free | 20% | — | kg |
| 7208.25 | Of a thickness of <il>4.75 mm</il> or more: | — | — | — | — |
| 7208.25.30.00 | Of high-strength steel | Free | 20% | — | kg |
| 7208.25.60.00 | Other (7208.25.60.00) | Free | — | — | kg |
| 7208.26.00 | Of a thickness of 3 mm or more but less than <il>4.75 mm</il> | Free | 0.4¢/kg + 20% | — | — |
| 7208.26.00.30 | High-strength steel | — | — | — | kg |
| 7208.26.00.60 | Other (7208.26.00.60) | — | — | — | kg |
| 7208.27.00 | Of a thickness of less than 3 mm | Free | 0.4¢/kg + 20% | — | — |
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | — | — | — | kg |
| 7208.27.00.45 | Other (7208.27.00.45) | — | — | — | kg |
| 7208.27.00.60 | Other (7208.27.00.60) | — | — | — | kg |
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | 20% | — | — |
| 7208.36.00.30 | High-strength steel | — | — | — | kg |
| 7208.36.00.60 | Other (7208.36.00.60) | — | — | — | kg |
| 7208.37.00 | Of a thickness of <il>4.75 mm</il> or more but not exceeding 10 mm | Free | 20% | — | — |
| 7208.37.00.30 | High-strength steel | — | — | — | kg |
| 7208.37.00.60 | Other (7208.37.00.60) | — | — | — | kg |
| 7208.38.00 | Of a thickness of 3 mm or more but less than <il>4.75 mm</il> | Free | 20% | — | — |
| 7208.38.00.15 | High-strength steel | — | — | — | kg |
| 7208.38.00.30 | With untrimmed edges | — | — | — | kg |
| 7208.38.00.90 | Other (7208.38.00.90) | — | — | — | kg |
| 7208.39.00 | Of a thickness of less than 3 mm | Free | 20% | — | — |
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | — | — | — | kg |
| 7208.39.00.25 | Other (7208.39.00.25) | — | — | — | kg |
| 7208.39.00.30 | With untrimmed edges | — | — | — | kg |
| 7208.39.00.90 | Other (7208.39.00.90) | — | — | — | kg |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief: | — | — | — | — |
| 7208.40.30 | Of a thickness of <il>4.75 mm</il> or more | Free | 20% | — | — |
| 7208.40.30.30 | Of a thickness exceeding 10 mm | — | — | — | kg |
| 7208.40.30.60 | Other (7208.40.30.60) | — | — | — | kg |
| 7208.40.60 | Of a thickness of less than <il>4.75 mm</il> | Free | 20% | — | — |
| 7208.40.60.30 | Of a thickness less than 3 mm | — | — | — | kg |
| 7208.40.60.60 | Other (7208.40.60.60) | — | — | — | kg |
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | 20% | — | — |
| 7208.51.00.30 | Universal mill plate | — | — | — | kg |
| 7208.51.00.45 | Of high-strength steel | — | — | — | kg |
| 7208.51.00.60 | Other (7208.51.00.60) | — | — | — | kg |
| 7208.52.00.00 | Of a thickness of <il>4.75 mm</il> or more but not exceeding 10 mm | Free | 20% | — | kg |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than <il>4.75 mm</il> | Free | 20% | — | kg |
| 7208.54.00.00 | Of a thickness of less than 3 mm | Free | 20% | — | kg |
| 7208.90.00.00 | Other (7208.90.00.00) | Free | 20% | — | kg |
| 7209 | Flat-rolled products of iron or nonalloy steel, of a width of <il>600 mm</il> or more, cold-rolled (cold-reduced), not clad, plated or coated: | — | — | — | — |
| 7209.15.00.00 | Of a thickness of 3 mm or more | Free | 0.4¢/kg + 20% | — | kg |
| 7209.16.00 | Of a thickness exceeding <il>1 mm</il> but less than 3 mm | Free | 0.4¢/kg + 20% | — | — |
| 7209.16.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | — | — | — | kg |
| 7209.16.00.45 | Other (7209.16.00.45) | — | — | — | kg |
| 7209.16.00.60 | Other (7209.16.00.60) | — | — | — | kg |
| 7209.16.00.70 | Annealed | — | — | — | kg |
| 7209.16.00.91 | Other (7209.16.00.91) | — | — | — | kg |
| 7209.17.00 | Of a thickness of 0.5 mm or more but not exceeding <il>1 mm</il> | Free | 0.4¢/kg + 20% | — | — |
| 7209.17.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | — | — | — | kg |
| 7209.17.00.45 | Other (7209.17.00.45) | — | — | — | kg |
| 7209.17.00.60 | Other (7209.17.00.60) | — | — | — | kg |
| 7209.17.00.70 | Annealed | — | — | — | kg |
| 7209.17.00.91 | Other (7209.17.00.91) | — | — | — | kg |
| 7209.18 | Of a thickness of less than 0.5 mm: | — | — | — | — |
| 7209.18.15 | Of high-strength steel | Free | 0.4¢/kg + 20% | — | — |
| 7209.18.15.30 | Annealed | — | — | — | kg |
| 7209.18.15.60 | Other (7209.18.15.60) | — | — | — | kg |
| 7209.18.25 | Of a thickness of less than 0.361 mm (blackplate) | Free | 20% | — | — |
| 7209.18.25.20 | Annealed | — | — | — | kg |
| 7209.18.25.85 | Other (7209.18.25.85) | — | — | — | kg |
| 7209.18.60 | Other (7209.18.60) | Free | — | — | — |
| 7209.18.60.20 | Annealed | — | — | — | kg |
| 7209.18.60.90 | Other (7209.18.60.90) | — | — | — | kg |
| 7209.25.00.00 | Of a thickness of 3 mm or more | Free | 0.4¢/kg + 20% | — | kg |
| 7209.26.00.00 | Of a thickness exceeding <il>1 mm</il> but less than 3 mm | Free | 0.4¢/kg + 20% | — | kg |
| 7209.27.00.00 | Of a thickness of 0.5 mm or more but not exceeding <il>1 mm</il> | Free | 0.4¢/kg + 20% | — | kg |
| 7209.28.00.00 | Of a thickness of less than 0.5 mm | Free | 0.4¢/kg + 20% | — | kg |
| 7209.90.00.00 | Other (7209.90.00.00) | Free | — | — | kg |
| 7210 | Flat-rolled products of iron or nonalloy steel, of a width of <il>600 mm</il> or more, clad, plated or coated: | — | — | — | — |
| 7210.11.00.00 | Of a thickness of 0.5 mm or more | Free | 6% | — | kg |
| 7210.12.00.00 | Of a thickness of less than 0.5 mm | Free | 6% | — | kg |
| 7210.20.00.00 | Plated or coated with lead, including terne-plate | Free | 6% | — | kg |
| 7210.30.00 | Electrolytically plated or coated with zinc | Free | 21.5% | — | — |
| 7210.30.00.30 | Of high-strength steel | — | — | — | kg |
| 7210.30.00.60 | Other (7210.30.00.60) | — | — | — | kg |
| 7210.41.00.00 | Corrugated | Free | 21.5% | — | kg |
| 7210.49.00 | Other (7210.49.00) | Free | 21.5% | — | — |
| 7210.49.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | — | — | — | kg |
| 7210.49.00.45 | Other (7210.49.00.45) | — | — | — | kg |
| 7210.49.00.91 | Of a thickness of 0.4 mm or more | — | — | — | kg |
| 7210.49.00.95 | Other (7210.49.00.95) | — | — | — | kg |
| 7210.50.00 | Plated or coated with chromium oxides or with chromium and chromium oxides | Free | 45% | — | — |
| 7210.50.00.20 | Of a width less than 1050 mm | — | — | — | kg |
| 7210.50.00.90 | Other (7210.50.00.90) | — | — | — | kg |
| 7210.61.00.00 | Plated or coated with aluminum-zinc alloys | Free | 21.5% | — | kg |
| 7210.69.00.00 | Other (7210.69.00.00) | Free | 21.5% | — | kg |
| 7210.70 | Painted, varnished or coated with plastics: | — | — | — | — |
| 7210.70.30.00 | Not coated or plated with metal and not clad | Free | 0.4¢/kg + 20% | — | kg |
| 7210.70.60 | Other (7210.70.60) | Free | 21.5% | — | — |
| 7210.70.60.30 | Electrolytically coated or plated | — | — | — | kg |
| 7210.70.60.60 | Other (7210.70.60.60) | — | — | — | kg |
| 7210.70.60.90 | Other (7210.70.60.90) | — | — | — | kg |
| 7210.90 | Other: | — | — | — | — |
| 7210.90.10.00 | Clad | Free | 30% | — | kg |
| 7210.90.60.00 | Electrolytically coated or plated with base metal | Free | 45% | — | kg |
| 7210.90.90.00 | Other (7210.90.90.00) | Free | 21.5% | — | kg |
| 7211 | Flat-rolled products of iron or nonalloy steel, of a width of less than <il>600 mm</il>, not clad, plated or coated: | — | — | — | — |
| 7211.13.00.00 | Universal mill plate | Free | 20% | — | kg |
| 7211.14.00 | Other, of a thickness of <il>4.75 mm</il> or more | Free | 20% | — | — |
| 7211.14.00.30 | Of high-strength steel | — | — | — | kg |
| 7211.14.00.45 | Not in coils | — | — | — | kg |
| 7211.14.00.90 | Other (7211.14.00.90) | — | — | — | kg |
| 7211.19 | Other: | — | — | — | — |
| 7211.19.15.00 | Of high-strength steel | Free | 25% | — | kg |
| 7211.19.20.00 | Of a thickness exceeding 1.25 mm | Free | 25% | — | kg |
| 7211.19.30.00 | Other (7211.19.30.00) | Free | 25% | — | kg |
| 7211.19.45.00 | Of high-strength steel | Free | 20% | — | kg |
| 7211.19.60.00 | Pickled | Free | — | — | kg |
| 7211.19.75 | Other (7211.19.75) | Free | 20% | — | — |
| 7211.19.75.30 | With untrimmed edges | — | — | — | kg |
| 7211.19.75.60 | Other (7211.19.75.60) | — | — | — | kg |
| 7211.19.75.90 | Other (7211.19.75.90) | — | — | — | kg |
| 7211.23 | Containing by weight less than 0.25 percent of carbon: | — | — | — | — |
| 7211.23.15.00 | Of high-strength steel | Free | 25% | — | kg |
| 7211.23.20.00 | Other (7211.23.20.00) | Free | 25% | — | kg |
| 7211.23.30.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | 25% | — | kg |
| 7211.23.45.00 | Of a thickness not exceeding 0.25 mm | Free | 25% | — | kg |
| 7211.23.60 | Other (7211.23.60) | Free | — | — | — |
| 7211.23.60.30 | Of a thickness exceeding 1.25 mm | — | — | — | kg |
| 7211.23.60.60 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | — | — | — | kg |
| 7211.23.60.90 | Of a thickness not exceeding 0.25 mm: | — | — | — | kg |
| 7211.29 | Other: | — | — | — | — |
| 7211.29.20 | Of a thickness exceeding 0.25 mm | Free | 25% | — | — |
| 7211.29.20.30 | Of a width less than 51 mm, in coils | — | — | — | kg |
| 7211.29.20.90 | Other (7211.29.20.90) | — | — | — | kg |
| 7211.29.45.00 | Other (7211.29.45.00) | Free | 25% | — | kg |
| 7211.29.60 | Other (7211.29.60) | Free | — | — | — |
| 7211.29.60.30 | Of a thickness exceeding 1.25 mm | — | — | — | kg |
| 7211.29.60.80 | Other (7211.29.60.80) | — | — | — | kg |
| 7211.90.00.00 | Other (7211.90.00.00) | Free | 20% | — | kg |
| 7212 | Flat-rolled products of iron or nonalloy steel, of a width of less than <il>600 mm</il>, clad, plated or coated: | — | — | — | — |
| 7212.10.00.00 | Plated or coated with tin | Free | 6% | — | kg |
| 7212.20.00.00 | Electrolytically plated or coated with zinc | Free | 21.5% | — | kg |
| 7212.30 | Otherwise plated or coated with zinc: | — | — | — | — |
| 7212.30.10 | Of a thickness exceeding 0.25 mm or more | Free | 25% | — | — |
| 7212.30.10.30 | Of a width less than 51 mm, in coils | — | — | — | kg |
| 7212.30.10.90 | Other (7212.30.10.90) | — | — | — | kg |
| 7212.30.30.00 | Other (7212.30.30.00) | Free | 25% | — | kg |
| 7212.30.50.00 | Other (7212.30.50.00) | Free | 21.5% | — | kg |
| 7212.40 | Painted, varnished or coated with plastics: | — | — | — | — |
| 7212.40.10.00 | Of a width of less than 300 mm | Free | 25% | — | kg |
| 7212.40.50.00 | Other (7212.40.50.00) | Free | — | — | kg |
| 7212.50.00.00 | Otherwise plated or coated | Free | 21.5% | — | kg |
| 7212.60.00.00 | Clad | Free | 30% | — | kg |
| 7213 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel: | — | — | — | — |
| 7213.10.00.00 | Concrete reinforcing bars and rods | Free | 20% | — | kg |
| 7213.20.00 | Other, of free-cutting steel | Free | 5.5% | — | — |
| 7213.20.00.10 | Containing by weight 0.1 percent or more of lead | — | — | — | kg |
| 7213.20.00.80 | Other (7213.20.00.80) | — | — | — | kg |
| 7213.91 | Of circular cross section measuring less than 14 mm in diameter: | — | — | — | — |
| 7213.91.30 | Not tempered, not treated and not partly manufactured | Free | 5.5% | — | — |
| 7213.91.30.11 | Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter | — | — | — | kg |
| 7213.91.30.15 | Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter | — | — | — | kg |
| 7213.91.30.20 | Of welding quality wire rods of a kind described in statistical note 7 to this chapter | — | — | — | kg |
| 7213.91.30.93 | Other (7213.91.30.93) | — | — | — | kg |
| 7213.91.45.00 | Containing by weight 0.6 percent or more of carbon | Free | 5.5% | — | kg |
| 7213.91.60.00 | Other (7213.91.60.00) | Free | 6% | — | kg |
| 7213.99.00 | Other (7213.99.00) | Free | 5.5% | — | — |
| 7213.99.00.30 | With a diameter of 14 mm or more but less than 19 mm | — | — | — | kg |
| 7213.99.00.60 | With a diameter of 19 mm or more | — | — | — | kg |
| 7213.99.00.90 | Other (7213.99.00.90) | — | — | — | kg |
| 7214 | Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling: | — | — | — | — |
| 7214.10.00.00 | Forged | Free | 20% | — | kg |
| 7214.20.00.00 | Concrete reinforcing bars and rods | Free | 20% | — | kg |
| 7214.30.00 | Other, of free-cutting steel | Free | 20% | — | — |
| 7214.30.00.10 | Containing by weight 0.1 percent or more of lead | — | — | — | kg |
| 7214.30.00.80 | Other (7214.30.00.80) | — | — | — | kg |
| 7214.91.00 | Of rectangular (other than square) cross-section | Free | 20% | — | — |
| 7214.91.00.16 | With a maximum cross section less than 152 mm | — | — | — | kg |
| 7214.91.00.20 | With a maximum cross section of 152 mm or more | — | — | — | kg |
| 7214.91.00.60 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7214.91.00.90 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7214.99.00 | Other (7214.99.00) | Free | 20% | — | — |
| 7214.99.00.16 | With a diameter less than 76 mm | — | — | — | kg |
| 7214.99.00.21 | With a diameter of 76 mm or more but not exceeding 152 mm | — | — | — | kg |
| 7214.99.00.26 | With a diameter exceeding 152 mm | — | — | — | kg |
| 7214.99.00.31 | With a diameter less than 76 mm | — | — | — | kg |
| 7214.99.00.36 | With a diameter of 76 mm or more but not exceeding 152 mm | — | — | — | kg |
| 7214.99.00.40 | With a diameter exceeding 152 mm | — | — | — | kg |
| 7214.99.00.45 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7214.99.00.60 | Containing by weight less than 0.25 percent of carbon | — | — | — | kg |
| 7214.99.00.75 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7214.99.00.90 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7215 | Other bars and rods of iron or nonalloy steel: | — | — | — | — |
| 7215.10.00 | Of free-cutting steel, not further worked than cold-formed or cold-finished | Free | 0.3¢/kg + 20% | — | — |
| 7215.10.00.10 | Containing by weight 0.1 percent or more of lead | — | — | — | kg |
| 7215.10.00.80 | Other (7215.10.00.80) | — | — | — | kg |
| 7215.50.00 | Other, not further worked than cold-formed or cold-finished | Free | 0.3¢/kg + 20% | — | — |
| 7215.50.00.16 | With a diameter or cross section measuring less than 76 mm | — | — | — | kg |
| 7215.50.00.18 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | — | — | — | kg |
| 7215.50.00.20 | With a diameter or cross section exceeding 228 mm | — | — | — | kg |
| 7215.50.00.61 | With a diameter or cross section measuring less than 76 mm | — | — | — | kg |
| 7215.50.00.63 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | — | — | — | kg |
| 7215.50.00.65 | With a diameter or cross section exceeding 228 mm | — | — | — | kg |
| 7215.50.00.90 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7215.90 | Other: | — | — | — | — |
| 7215.90.10.00 | Not cold-formed | Free | 0.4¢/kg + 20% | — | kg |
| 7215.90.30.00 | Cold-formed | Free | 0.3¢/kg + 20% | — | kg |
| 7215.90.50.00 | Other (7215.90.50.00) | Free | — | — | kg |
| 7216 | Angles, shapes and sections of iron or nonalloy steel: | — | — | — | — |
| 7216.10.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than <il>80 mm</il> | Free | 2% | — | — |
| 7216.10.00.10 | U sections | — | — | — | kg |
| 7216.10.00.50 | Other (7216.10.00.50) | — | — | — | kg |
| 7216.21.00.00 | L sections | Free | 2% | — | kg |
| 7216.22.00.00 | T sections | Free | 2% | — | kg |
| 7216.31.00.00 | U sections | Free | 2% | — | kg |
| 7216.32.00.00 | I sections (standard beams) | Free | 2% | — | kg |
| 7216.33.00 | H sections | Free | 2% | — | — |
| 7216.33.00.30 | Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm | — | — | — | kg |
| 7216.33.00.60 | Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm | — | — | — | kg |
| 7216.33.00.90 | Other (7216.33.00.90) | — | — | — | kg |
| 7216.40.00 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of <il>80 mm</il> or more | Free | 2% | — | — |
| 7216.40.00.10 | L sections | — | — | — | kg |
| 7216.40.00.50 | Other (7216.40.00.50) | — | — | — | kg |
| 7216.50.00.00 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | Free | 2% | — | kg |
| 7216.61.00.00 | Obtained from flat-rolled products | Free | 20% | — | kg |
| 7216.69.00.00 | Other (7216.69.00.00) | Free | 20% | — | kg |
| 7216.91.00 | Cold-formed or cold-finished from flat-rolled products | Free | 20% | — | — |
| 7216.91.00.10 | Drilled, notched, punched or cambered | — | — | — | kg |
| 7216.91.00.90 | Other (7216.91.00.90) | — | — | — | kg |
| 7216.99.00 | Other (7216.99.00) | Free | 20% | — | — |
| 7216.99.00.10 | Drilled, notched, punched or cambered | — | — | — | kg |
| 7216.99.00.90 | Other (7216.99.00.90) | — | — | — | kg |
| 7217 | Wire of iron or nonalloy steel: | — | — | — | — |
| 7217.10 | Not plated or coated, whether or not polished: | — | — | — | — |
| 7217.10.10.00 | Of a thickness not exceeding 0.25 mm | Free | 25% | — | kg |
| 7217.10.20.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | 25% | — | kg |
| 7217.10.30.00 | Of a thickness exceeding 1.25 mm | Free | 25% | — | kg |
| 7217.10.40 | With a diameter of less than 1.5 mm | Free | 25% | — | — |
| 7217.10.40.40 | In coils weighing not more than 2 kilograms | — | — | — | kg |
| 7217.10.40.45 | Other (7217.10.40.45) | — | — | — | kg |
| 7217.10.40.90 | Other (7217.10.40.90) | — | — | — | kg |
| 7217.10.50 | With a diameter of 1.5 mm or more | Free | 7% | — | — |
| 7217.10.50.30 | Heat treated | — | — | — | kg |
| 7217.10.50.90 | Other (7217.10.50.90) | — | — | — | kg |
| 7217.10.60.00 | Other wire | Free | 25% | — | kg |
| 7217.10.70.00 | Flat wire | Free | 25% | — | kg |
| 7217.10.80 | Round wire | Free | 25% | — | — |
| 7217.10.80.10 | Heat treated | — | — | — | kg |
| 7217.10.80.20 | Other (7217.10.80.20) | — | — | — | kg |
| 7217.10.80.25 | With a diameter of less than 1.0 mm | — | — | — | kg |
| 7217.10.80.30 | With a diameter of 1.0 mm or more but less than 1.5 mm | — | — | — | kg |
| 7217.10.80.45 | With a diameter of 1.5 mm or more | — | — | — | kg |
| 7217.10.80.60 | With a diameter of less than 1.0 mm | — | — | — | kg |
| 7217.10.80.75 | With a diameter of 1.0 mm or more but less than 1.5 mm | — | — | — | kg |
| 7217.10.80.90 | With a diameter of 1.5 mm or more | — | — | — | kg |
| 7217.10.90.00 | Other wire | Free | 25% | — | kg |
| 7217.20 | Plated or coated with zinc: | — | — | — | — |
| 7217.20.15.00 | Flat wire | Free | 26% | — | kg |
| 7217.20.30.00 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | Free | 7% | — | kg |
| 7217.20.45 | Other (7217.20.45) | Free | 25% | — | — |
| 7217.20.45.10 | Containing by weight less than 0.25 percent of carbon | — | — | — | kg |
| 7217.20.45.20 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7217.20.45.30 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7217.20.45.40 | Containing by weight less than 0.25 percent of carbon | — | — | — | kg |
| 7217.20.45.50 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7217.20.45.60 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7217.20.45.70 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7217.20.45.80 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7217.20.60.00 | Containing by weight less than 0.25 percent of carbon | Free | 25% | — | kg |
| 7217.20.75.00 | Other (7217.20.75.00) | Free | 26% | — | kg |
| 7217.30 | Plated or coated with other base metals: | — | — | — | — |
| 7217.30.15 | Flat wire | Free | 26% | — | — |
| 7217.30.15.30 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7217.30.15.60 | Other (7217.30.15.60) | — | — | — | kg |
| 7217.30.30.00 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | Free | 7% | — | kg |
| 7217.30.45 | Other (7217.30.45) | Free | 25% | — | — |
| 7217.30.45.04 | Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding | — | — | — | kg |
| 7217.30.45.11 | Containing by weight less than 0.25 percent of carbon | — | — | — | kg |
| 7217.30.45.20 | Containing by weight 0.25 percent or more but less than 0.6 percent or carbon | — | — | — | kg |
| 7217.30.45.30 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7217.30.45.41 | Containing by weight less than 0.25 percent of carbon | — | — | — | kg |
| 7217.30.45.50 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7217.30.45.60 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7217.30.45.90 | With a diameter of 1.5 mm or more | — | — | — | kg |
| 7217.30.60.00 | Containing by weight less than 0.25 percent of carbon | Free | 25% | — | kg |
| 7217.30.75.00 | Other (7217.30.75.00) | Free | 26% | — | kg |
| 7217.90 | Other: | — | — | — | — |
| 7217.90.10.00 | Coated with plastics | Free | 2% | — | kg |
| 7217.90.50 | Other (7217.90.50) | Free | 35% | — | — |
| 7217.90.50.30 | Containing by weight less than 0.25 percent of carbon | — | — | — | kg |
| 7217.90.50.60 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | — | — | — | kg |
| 7217.90.50.90 | Containing by weight 0.6 percent or more of carbon | — | — | — | kg |
| 7218 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel: | — | — | — | — |
| 7218.10.00.00 | Ingots and other primary forms | Free | 29% | — | kg |
| 7218.91.00 | Of rectangular (other than square) cross-section | Free | 29% | — | — |
| 7218.91.00.15 | Having a cross-sectional area of less than <il>232 cm<sup>2</sup></il> | — | — | — | kg |
| 7218.91.00.30 | Having a cross-sectional area of <il>232 cm<sup>2</sup></il> or more | — | — | — | kg |
| 7218.91.00.60 | Having a width at least four times the thickness | — | — | — | kg |
| 7218.99.00 | Other (7218.99.00) | Free | 29% | — | — |
| 7218.99.00.15 | Having a cross-sectional area of less than <il>232 cm<sup>2</sup></il> | — | — | — | kg |
| 7218.99.00.30 | Having a cross-sectional area of <il>232 cm<sup>2</sup></il> or more | — | — | — | kg |
| 7218.99.00.45 | Having a cross-sectional area of less than <il>232 cm<sup>2</sup></il> | — | — | — | kg |
| 7218.99.00.60 | Having a cross-sectional area of <il>232 cm<sup>2</sup></il> or more | — | — | — | kg |
| 7218.99.00.90 | Other (7218.99.00.90) | — | — | — | kg |
| 7219 | Flat-rolled products of stainless steel, of a width of <il>600 mm</il> or more: | — | — | — | — |
| 7219.11.00 | Of a thickness exceeding 10 mm | Free | 29% | — | — |
| 7219.11.00.30 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.11.00.60 | Of a width exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.12.00 | Of a thickness of <il>4.75 mm</il> or more but not exceeding 10 mm | Free | 29% | — | — |
| 7219.12.00.02 | Not annealed or not pickled | — | — | — | kg |
| 7219.12.00.06 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.12.00.21 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.12.00.26 | Of a width exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.12.00.51 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.12.00.56 | Of a width exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.12.00.66 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.12.00.71 | Other (7219.12.00.71) | — | — | — | kg |
| 7219.12.00.81 | Other (7219.12.00.81) | — | — | — | kg |
| 7219.13.00 | Of a thickness of 3 mm or more but less than <il>4.75 mm</il> | Free | 29% | — | — |
| 7219.13.00.02 | Not annealed or not pickled | — | — | — | kg |
| 7219.13.00.31 | Of a width of 1370 mm or more | — | — | — | kg |
| 7219.13.00.51 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.13.00.71 | Other (7219.13.00.71) | — | — | — | kg |
| 7219.13.00.81 | Other (7219.13.00.81) | — | — | — | kg |
| 7219.14.00 | Of a thickness of less than 3 mm | Free | 29% | — | — |
| 7219.14.00.30 | Of a width of 1370 mm or more | — | — | — | kg |
| 7219.14.00.65 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.14.00.90 | Other (7219.14.00.90) | — | — | — | kg |
| 7219.21.00 | Of a thickness exceeding 10 mm | Free | 29% | — | — |
| 7219.21.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.21.00.20 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.21.00.40 | Of a width exceeding <il>1575 mm</il> but not exceeding 1880 mm | — | — | — | kg |
| 7219.21.00.60 | Of a width exceeding 1880 mm | — | — | — | kg |
| 7219.22.00 | Of a thickness of <il>4.75 mm</il> or more but not exceeding 10 mm | Free | 29% | — | — |
| 7219.22.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.22.00.15 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.22.00.20 | Of a width exceeding <il>1575 mm</il> but not exceeding 1880 mm | — | — | — | kg |
| 7219.22.00.25 | Of a width exceeding 1880 mm | — | — | — | kg |
| 7219.22.00.35 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.22.00.40 | Of a width exceeding <il>1575 mm</il> but not exceeding 1880 mm | — | — | — | kg |
| 7219.22.00.45 | Of a width exceeding 1880 mm | — | — | — | kg |
| 7219.22.00.70 | Of a width not exceeding <il>1575 mm</il> | — | — | — | kg |
| 7219.22.00.75 | Of a width exceeding <il>1575 mm</il> but not exceeding 1880 mm | — | — | — | kg |
| 7219.22.00.80 | Of a width exceeding 1880 mm | — | — | — | kg |
| 7219.23.00 | Of a thickness of 3 mm or more but less than <il>4.75 mm</il> | Free | 29% | — | — |
| 7219.23.00.30 | Of a width of 1370 mm or more | — | — | — | kg |
| 7219.23.00.60 | Other (7219.23.00.60) | — | — | — | kg |
| 7219.24.00 | Of a thickness of less than 3 mm | Free | 29% | — | — |
| 7219.24.00.30 | Of a width of 1370 mm or more | — | — | — | kg |
| 7219.24.00.60 | Other (7219.24.00.60) | — | — | — | kg |
| 7219.31.00 | Of a thickness of <il>4.75 mm</il> or more | Free | 29% | — | — |
| 7219.31.00.10 | In coils | — | — | — | kg |
| 7219.31.00.50 | Not in coils | — | — | — | kg |
| 7219.32.00 | Of a thickness of 3 mm or more but less than <il>4.75 mm</il> | Free | 29% | — | — |
| 7219.32.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.32.00.20 | Containing more than 0.5 percent by weight of nickel | — | — | — | kg |
| 7219.32.00.25 | Other (7219.32.00.25) | — | — | — | kg |
| 7219.32.00.35 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.32.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.32.00.38 | Other (7219.32.00.38) | — | — | — | kg |
| 7219.32.00.42 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7219.32.00.44 | Other (7219.32.00.44) | — | — | — | kg |
| 7219.32.00.45 | Of a width of 1370 mm or more | — | — | — | kg |
| 7219.32.00.60 | Other (7219.32.00.60) | — | — | — | kg |
| 7219.33.00 | Of a thickness exceeding <il>1 mm</il> but less than 3 mm | Free | 29% | — | — |
| 7219.33.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel | — | — | — | kg |
| 7219.33.00.25 | Other (7219.33.00.25) | — | — | — | kg |
| 7219.33.00.35 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.33.00.38 | Other (7219.33.00.38) | — | — | — | kg |
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7219.33.00.44 | Other (7219.33.00.44) | — | — | — | kg |
| 7219.33.00.45 | Of a width of 1370 mm or more | — | — | — | kg |
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | — | — | — | kg |
| 7219.33.00.80 | Other (7219.33.00.80) | — | — | — | kg |
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding <il>1 mm</il> | Free | 29% | — | — |
| 7219.34.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.34.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.34.00.25 | Other (7219.34.00.25) | — | — | — | kg |
| 7219.34.00.30 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7219.34.00.35 | Other (7219.34.00.35) | — | — | — | kg |
| 7219.34.00.50 | Not in coils | — | — | — | kg |
| 7219.35.00 | Of a thickness of less than 0.5 mm | Free | 29% | — | — |
| 7219.35.00.05 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.35.00.15 | Other (7219.35.00.15) | — | — | — | kg |
| 7219.35.00.30 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7219.35.00.35 | Other (7219.35.00.35) | — | — | — | kg |
| 7219.35.00.50 | Not in coils | — | — | — | kg |
| 7219.90.00 | Other (7219.90.00) | Free | 29% | — | — |
| 7219.90.00.10 | Of high-nickel alloy steel | — | — | — | kg |
| 7219.90.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7219.90.00.25 | Other (7219.90.00.25) | — | — | — | kg |
| 7219.90.00.60 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7219.90.00.80 | Other (7219.90.00.80) | — | — | — | kg |
| 7220 | Flat-rolled products of stainless steel, of a width of less than <il>600 mm</il>: | — | — | — | — |
| 7220.11.00.00 | Of a thickness of <il>4.75 mm</il> or more | Free | 29% | — | kg |
| 7220.12 | Of a thickness of less than <il>4.75 mm</il>: | — | — | — | — |
| 7220.12.10.00 | Of a width of 300 mm or more | Free | 29% | — | kg |
| 7220.12.50.00 | Of a width of less than 300 mm | Free | 34% | — | kg |
| 7220.20 | Not further worked than cold-rolled (cold-reduced): | — | — | — | — |
| 7220.20.10 | Of a width of 300 mm or more | Free | 29% | — | — |
| 7220.20.10.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7220.20.10.15 | Other (7220.20.10.15) | — | — | — | kg |
| 7220.20.10.60 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7220.20.10.80 | Other (7220.20.10.80) | — | — | — | kg |
| 7220.20.60 | Of a thickness exceeding 1.25 mm | Free | 34% | — | — |
| 7220.20.60.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7220.20.60.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7220.20.60.15 | Other (7220.20.60.15) | — | — | — | kg |
| 7220.20.60.60 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7220.20.60.80 | Other (7220.20.60.80) | — | — | — | kg |
| 7220.20.70 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | 34% | — | — |
| 7220.20.70.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7220.20.70.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7220.20.70.15 | Other (7220.20.70.15) | — | — | — | kg |
| 7220.20.70.60 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7220.20.70.80 | Other (7220.20.70.80) | — | — | — | kg |
| 7220.20.80.00 | Razor blade steel | Free | 34% | — | kg |
| 7220.20.90 | Other (7220.20.90) | Free | 34% | — | — |
| 7220.20.90.30 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | — | — | — | kg |
| 7220.20.90.60 | Other (7220.20.90.60) | — | — | — | kg |
| 7220.90.00 | Other (7220.90.00) | Free | 46% | — | — |
| 7220.90.00.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | — | — | — | kg |
| 7220.90.00.15 | Other (7220.90.00.15) | — | — | — | kg |
| 7220.90.00.60 | Containing less than 15 percent by weight of chromium | — | — | — | kg |
| 7220.90.00.80 | Other (7220.90.00.80) | — | — | — | kg |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | Free | 11% | — | — |
| 7221.00.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7221.00.00.17 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7221.00.00.18 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7221.00.00.30 | With a diameter of 14 mm or more but less than 19 mm | — | — | — | kg |
| 7221.00.00.45 | With a diameter of 19 mm or more | — | — | — | kg |
| 7221.00.00.75 | Other (7221.00.00.75) | — | — | — | kg |
| 7222 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: | — | — | — | — |
| 7222.11.00 | Of circular cross-section | Free | 29% | — | — |
| 7222.11.00.01 | Electroslag or vacuum arc remelted | — | — | — | kg |
| 7222.11.00.06 | Of high-nickel alloy steel | — | — | — | kg |
| 7222.11.00.57 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.11.00.59 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.11.00.82 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.11.00.84 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.19.00 | Other (7222.19.00) | Free | 29% | — | — |
| 7222.19.00.01 | Electroslag or vacuum arc remelted | — | — | — | kg |
| 7222.19.00.06 | Of high-nickel alloy steel | — | — | — | kg |
| 7222.19.00.52 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.19.00.54 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.20.00 | Bars and rods, not further worked than cold-formed or cold-finished | Free | 29% | — | — |
| 7222.20.00.01 | Electroslag or vacuum arc remelted | — | — | — | kg |
| 7222.20.00.06 | Of high-nickel alloy steel | — | — | — | kg |
| 7222.20.00.41 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.43 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.62 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.64 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.67 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.69 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.71 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.20.00.73 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.30.00 | Other bars and rods | Free | 29% | — | — |
| 7222.30.00.01 | Electroslag or vacuum arc remelted | — | — | — | kg |
| 7222.30.00.12 | Of high-nickel alloy steel | — | — | — | kg |
| 7222.30.00.22 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.30.00.24 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.30.00.82 | Containing less than 8 percent by weight of nickel | — | — | — | kg |
| 7222.30.00.84 | Containing 8 percent or more but less than 24 percent by weight of nickel | — | — | — | kg |
| 7222.40 | Angles, shapes and sections: | — | — | — | — |
| 7222.40.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | 10% | — | — |
| 7222.40.30.25 | Angles | — | — | — | kg |
| 7222.40.30.45 | Other (7222.40.30.45) | — | — | — | kg |
| 7222.40.30.65 | Angles | — | — | — | kg |
| 7222.40.30.85 | Other (7222.40.30.85) | — | — | — | kg |
| 7222.40.60.00 | Other (7222.40.60.00) | Free | 28% | — | kg |
| 7223.00 | Wire of stainless steel: | — | — | — | — |
| 7223.00.10 | Round wire | Free | 34% | — | — |
| 7223.00.10.05 | Spring round wire of a kind described in statistical note 8 to this chapter | — | — | — | kg |
| 7223.00.10.16 | With a diameter of less than 0.25 mm | — | — | — | kg |
| 7223.00.10.31 | With a diameter of 0.25 mm or more but less than 0.76 mm | — | — | — | kg |
| 7223.00.10.46 | With a diameter of 0.76 mm or more but less than 1.52 mm | — | — | — | kg |
| 7223.00.10.61 | With a diameter of 1.52 mm or more but less than 5.1 mm | — | — | — | kg |
| 7223.00.10.76 | With a diameter of 5.1 mm or more | — | — | — | kg |
| 7223.00.50.00 | Flat wire | Free | 34% | — | kg |
| 7223.00.90.00 | Other (7223.00.90.00) | Free | 34% | — | kg |
| 7224 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel: | — | — | — | — |
| 7224.10.00 | Ingots and other primary forms | Free | 28% | — | — |
| 7224.10.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7224.10.00.45 | Of tool steel | — | — | — | kg |
| 7224.10.00.75 | Other (7224.10.00.75) | — | — | — | kg |
| 7224.90.00 | Other (7224.90.00) | Free | 28% | — | — |
| 7224.90.00.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7224.90.00.15 | Having a width less than four times the thickness | — | — | — | kg |
| 7224.90.00.25 | Having a width at least four times the thickness | — | — | — | kg |
| 7224.90.00.35 | Other (7224.90.00.35) | — | — | — | kg |
| 7224.90.00.45 | Having a width less than four times the thickness | — | — | — | kg |
| 7224.90.00.55 | Having a width at least four times the thickness | — | — | — | kg |
| 7224.90.00.65 | Of circular cross section | — | — | — | kg |
| 7224.90.00.75 | Other (7224.90.00.75) | — | — | — | kg |
| 7225 | Flat-rolled products of other alloy steel, of a width of <il>600 mm</il> or more: | — | — | — | — |
| 7225.11.00.00 | Grain-oriented | Free | 28% | — | kg |
| 7225.19.00.00 | Other (7225.19.00.00) | Free | 28% | — | kg |
| 7225.30 | Other, not further worked than hot-rolled, in coils: | — | — | — | — |
| 7225.30.11 | Of tool steel | Free | 29% | — | — |
| 7225.30.11.10 | Of high-speed steel | — | — | — | kg |
| 7225.30.11.80 | Other (7225.30.11.80) | — | — | — | kg |
| 7225.30.30 | Other (7225.30.30) | Free | 28% | — | — |
| 7225.30.30.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7225.30.30.50 | Other (7225.30.30.50) | — | — | — | kg |
| 7225.30.51 | Of tool steel | Free | 29% | — | — |
| 7225.30.51.10 | Of high-speed steel | — | — | — | kg |
| 7225.30.51.80 | Other (7225.30.51.80) | — | — | — | kg |
| 7225.30.70.00 | Other (7225.30.70.00) | Free | 28% | — | kg |
| 7225.40 | Other, not further worked than hot-rolled, not in coils: | — | — | — | — |
| 7225.40.11 | Of tool steel | Free | 29% | — | — |
| 7225.40.11.10 | Of high-speed steel | — | — | — | kg |
| 7225.40.11.80 | Other (7225.40.11.80) | — | — | — | kg |
| 7225.40.30 | Other (7225.40.30) | Free | 28% | — | — |
| 7225.40.30.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7225.40.30.50 | Other (7225.40.30.50) | — | — | — | kg |
| 7225.40.51 | Of tool steel | Free | 29% | — | — |
| 7225.40.51.10 | Of high-speed steel | — | — | — | kg |
| 7225.40.51.30 | Of ball-bearing steel | — | — | — | kg |
| 7225.40.51.60 | Other (7225.40.51.60) | — | — | — | kg |
| 7225.40.70.00 | Other (7225.40.70.00) | Free | 28% | — | kg |
| 7225.50 | Other, not further worked than cold-rolled (cold-reduced): | — | — | — | — |
| 7225.50.11 | Of tool steel | Free | 29% | — | — |
| 7225.50.11.10 | Of high-speed steel | — | — | — | kg |
| 7225.50.11.30 | Of ball-bearing steel | — | — | — | kg |
| 7225.50.11.60 | Other (7225.50.11.60) | — | — | — | kg |
| 7225.50.60.00 | Of a thickness of <il>4.75 mm</il> or more | Free | 28% | — | kg |
| 7225.50.70.00 | Heat-resisting steel | Free | 29% | — | kg |
| 7225.50.80 | Other (7225.50.80) | Free | 28% | — | — |
| 7225.50.80.10 | Of high-nickel alloy steel | — | — | — | kg |
| 7225.50.80.80 | Other (7225.50.80.80) | — | — | — | kg |
| 7225.91.00.00 | Electrolytically plated or coated with zinc | Free | 28% | — | kg |
| 7225.92.00.00 | Otherwise plated or coated with zinc | Free | 28% | — | kg |
| 7225.99.00 | Other (7225.99.00) | Free | 28% | — | — |
| 7225.99.00.10 | Of high-nickel alloy steel | — | — | — | kg |
| 7225.99.00.90 | Other (7225.99.00.90) | — | — | — | kg |
| 7226 | Flat-rolled products of other alloy steel, of a width of less than <il>600 mm</il>: | — | — | — | — |
| 7226.11 | Grain-oriented: | — | — | — | — |
| 7226.11.10.00 | Of a width of 300 mm or more | Free | 28% | — | kg |
| 7226.11.90 | Of a width of less than 300 mm | Free | 33% | — | — |
| 7226.11.90.30 | Of thickness not exceeding 0.25 mm | — | — | — | kg |
| 7226.11.90.60 | Other (7226.11.90.60) | — | — | — | kg |
| 7226.19 | Other: | — | — | — | — |
| 7226.19.10.00 | Of a width of 300 mm or more | Free | 28% | — | kg |
| 7226.19.90.00 | Of a width of less than 300 mm | Free | 33% | — | kg |
| 7226.20.00.00 | Of high-speed steel | Free | 37% | — | kg |
| 7226.91 | Not further worked than hot-rolled: | — | — | — | — |
| 7226.91.05.00 | Of chipper knife steel | Free | 34% | — | kg |
| 7226.91.15 | Of a width of 300 mm or more | Free | 29% | — | — |
| 7226.91.15.30 | Of ball-bearing steel | — | — | — | kg |
| 7226.91.15.60 | Other (7226.91.15.60) | — | — | — | kg |
| 7226.91.25 | Of a width of less than 300 mm | Free | 34% | — | — |
| 7226.91.25.30 | Of ball-bearing steel | — | — | — | kg |
| 7226.91.25.60 | Other (7226.91.25.60) | — | — | — | kg |
| 7226.91.50.00 | Of a thickness of <il>4.75 mm</il> or more | Free | 28% | — | kg |
| 7226.91.70.00 | Of a width of 300 mm or more | Free | 28% | — | kg |
| 7226.91.80.00 | Of a width of less than 300 mm | Free | 33% | — | kg |
| 7226.92 | Not further worked than cold-rolled (cold-reduced): | — | — | — | — |
| 7226.92.10 | Of a width of 300 mm or more | Free | — | — | — |
| 7226.92.10.30 | Of ball-bearing steel | — | — | — | kg |
| 7226.92.10.60 | Other (7226.92.10.60) | — | — | — | kg |
| 7226.92.30 | Of a width of less than 300 mm | Free | 34% | — | — |
| 7226.92.30.30 | Of ball-bearing steel | — | — | — | kg |
| 7226.92.30.60 | Other (7226.92.30.60) | — | — | — | kg |
| 7226.92.50.00 | Of a width of 300 mm or more | Free | — | — | kg |
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | Free | 33% | — | — |
| 7226.92.70.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7226.92.70.50 | Other (7226.92.70.50) | — | — | — | kg |
| 7226.92.80 | Of a thickness exceeding 0.25 mm | Free | 33% | — | — |
| 7226.92.80.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7226.92.80.50 | Other (7226.92.80.50) | — | — | — | kg |
| 7226.99.01 | Other (7226.99.01) | Free | 33% | — | — |
| 7226.99.01.10 | Electrolytically plated or coated with zinc | — | — | — | kg |
| 7226.99.01.30 | Otherwise plated or coated with zinc | — | — | — | kg |
| 7226.99.01.80 | Other (7226.99.01.80) | — | — | — | kg |
| 7227 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: | — | — | — | — |
| 7227.10.00.00 | Of high-speed steel | Free | 14% | — | kg |
| 7227.20.00 | Of silico-manganese steel | Free | 10% | — | — |
| 7227.20.00.30 | Of welding quality wire rods of a kind described in statistical note 7 to this chapter | — | — | — | kg |
| 7227.20.00.80 | Other (7227.20.00.80) | — | — | — | kg |
| 7227.90 | Other: | — | — | — | — |
| 7227.90.10 | Not tempered, not treated, and not partly manufactured | Free | 12% | — | — |
| 7227.90.10.30 | Of ball-bearing steel | — | — | — | kg |
| 7227.90.10.60 | Other (7227.90.10.60) | — | — | — | kg |
| 7227.90.20 | Other (7227.90.20) | Free | 11% | — | — |
| 7227.90.20.30 | Of ball-bearing steel | — | — | — | kg |
| 7227.90.20.60 | Other (7227.90.20.60) | — | — | — | kg |
| 7227.90.60 | Other (7227.90.60) | Free | 10% | — | — |
| 7227.90.60.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7227.90.60.10 | Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter | — | — | — | kg |
| 7227.90.60.20 | Of welding quality wire rods of a kind described in statistical note 7 to this chapter | — | — | — | kg |
| 7227.90.60.30 | With a diameter of less than 14 mm | — | — | — | kg |
| 7227.90.60.35 | With a diameter of 14 mm or more but less than 19 mm | — | — | — | kg |
| 7227.90.60.40 | With a diameter of 19 mm or more | — | — | — | kg |
| 7227.90.60.90 | Other (7227.90.60.90) | — | — | — | kg |
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: | — | — | — | — |
| 7228.10.00 | Bars and rods, of high-speed steel | Free | 32% | — | — |
| 7228.10.00.10 | Not cold-formed | — | — | — | kg |
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than <il>18 mm</il> | — | — | — | kg |
| 7228.10.00.60 | With a maximum cross-sectional dimension of <il>18 mm</il> or more | — | — | — | kg |
| 7228.20 | Bars and rods, of silico-manganese steel: | — | — | — | — |
| 7228.20.10.00 | Not cold-formed | Free | 28% | — | kg |
| 7228.20.50.00 | Cold-formed | Free | 28% | — | kg |
| 7228.30 | Of tool steel (other than high-speed steel): | — | — | — | — |
| 7228.30.20.00 | Of ball-bearing steel | Free | 29% | — | kg |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | Free | 28% | — | kg |
| 7228.30.60.00 | Other (7228.30.60.00) | Free | 29% | — | kg |
| 7228.30.80 | Other (7228.30.80) | Free | 28% | — | — |
| 7228.30.80.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7228.30.80.10 | Concrete reinforcing bars and rods | — | — | — | kg |
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | — | — | — | kg |
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | — | — | — | kg |
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | — | — | — | kg |
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | — | — | — | kg |
| 7228.40.00.00 | Other bars and rods, not further worked than forged | Free | 28% | — | kg |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished: | — | — | — | — |
| 7228.50.10 | Of tool steel (other than high-speed steel) | Free | 29% | — | — |
| 7228.50.10.10 | Of ball-bearing steel | — | — | — | kg |
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished | — | — | — | kg |
| 7228.50.10.40 | Other (7228.50.10.40) | — | — | — | kg |
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished | — | — | — | kg |
| 7228.50.10.80 | Other (7228.50.10.80) | — | — | — | kg |
| 7228.50.50 | Other (7228.50.50) | Free | 28% | — | — |
| 7228.50.50.05 | Of high-nickel alloy steel | — | — | — | kg |
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm | — | — | — | kg |
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | — | — | — | kg |
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm | — | — | — | kg |
| 7228.60 | Other bars and rods: | — | — | — | — |
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | 29% | — | — |
| 7228.60.10.30 | Of ball-bearing steel | — | — | — | kg |
| 7228.60.10.60 | Other (7228.60.10.60) | — | — | — | kg |
| 7228.60.60.00 | Not cold-formed | Free | 28% | — | kg |
| 7228.60.80.00 | Cold-formed | Free | 28% | — | kg |
| 7228.70 | Angles, shapes and sections: | — | — | — | — |
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | 10% | — | — |
| 7228.70.30.10 | U, I, H and T sections | — | — | — | kg |
| 7228.70.30.20 | Angles | — | — | — | kg |
| 7228.70.30.41 | Other (7228.70.30.41) | — | — | — | kg |
| 7228.70.30.60 | Angles | — | — | — | kg |
| 7228.70.30.81 | Other (7228.70.30.81) | — | — | — | kg |
| 7228.70.60.00 | Other (7228.70.60.00) | Free | 28% | — | kg |
| 7228.80.00.00 | Hollow drill bars and rods | Free | 30% | — | kg |
| 7229 | Wire of other alloy steel: | — | — | — | — |
| 7229.20.00 | Of silico-manganese steel | Free | 33% | — | — |
| 7229.20.00.10 | Plated or coated with copper | — | — | — | kg |
| 7229.20.00.15 | Other (7229.20.00.15) | — | — | — | kg |
| 7229.20.00.90 | Other (7229.20.00.90) | — | — | — | kg |
| 7229.90 | Other: | — | — | — | — |
| 7229.90.05.00 | Of high-speed steel | Free | 37% | — | kg |
| 7229.90.10.00 | Flat wire | Free | 33% | — | kg |
| 7229.90.50 | Round wire | Free | 33% | — | — |
| 7229.90.50.06 | Plated or coated with copper | — | — | — | kg |
| 7229.90.50.08 | Other (7229.90.50.08) | — | — | — | kg |
| 7229.90.50.16 | With a diameter of less than 1.0 mm | — | — | — | kg |
| 7229.90.50.31 | With a diameter of 1.0 mm or more but less than 1.5 mm | — | — | — | kg |
| 7229.90.50.51 | With a diameter of 1.5 mm or more | — | — | — | kg |
| 7229.90.90.00 | Other wire | Free | 33% | — | kg |
Duty and tariff data is for informational purposes only. Always verify with official sources.